IBM eserver 630 6C4, Service Manual

Page: 369 / 573

Procedure List
Procedure Procedure Name and Page Location
Adapters “PCI Adapters” on page 371
Battery Replacement “Replacing the Battery” on page 436
Bezels “Bezels” on page 369
Bezel Door “Bezel Door (Model 6E4)” on page 368
Cable Management Arm “Installing the Cable-Management Arm” on page 505
CD-ROM Drive “Media Drives (Diskette, CD-ROM, Tape, or Disk Drive)” on
page 399
CEC Backplane “Central Electronics Complex (CEC) Backplane” on page 450
Covers “Covers” on page 357
Disk Drive “Hot-Plug Disk Drives” on page 403
Disk Drive Backplane “Disk Drive Backplane” on page 414
Disk Drive Configuration or
Deconfiguration “Deconfiguring (Removing) or Configuring a Disk Drive” on
page 403
Diskette Drive “Media Drives (Diskette, CD-ROM, Tape, or Disk Drive)” on
page 399
Fans “Fans” on page 391
HMC Appendix E, “Install a Hardware Management Console (HMC)” on
page 507
I/O Card (Refer to PCI Riser Card)
Media Drives “Media Drives (Diskette, CD-ROM, Tape, or Disk Drive)” on
page 399
Memory DIMMs “Memory DIMMs” on page 430
Operating Position “Returning the Model 6C4 to the Operating Position” on page 356
Operator Panel “Operator Panel” on page 419
PCI Riser Card “PCI Riser Card” on page 408
Power Supply “Power Supplies” on page 441
Processor Card “Processor Card” on page 425
Rack Installation “Model 6C4 Removal and Installation into a Rack” on page 502
Release Latch and Brackets “Model 6C4 Drawer Release Latch and Brackets” on page 351
Service Position “Placing the Model 6C4 into the Service Position” on page 355
Starting the System “Starting the System” on page 350
Static-Sensitive Devices “Handling Static-Sensitive Devices” on page 348
Stopping the System “Stopping the System” on page 350
System Board (Refer to CEC Backplane)
Rack Hardware “Attaching the Mounting Hardware to the Rack Enclosure” on
page 494
VPD Update “System Vital Product Data (VPD) Update Procedure” on page 423
Chapter 9. Removal and Replacement Procedures
349