IBM eserver 630 6C4, Service Manual

Page: 269 / 573

Table 6. Service Processor Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
460B 28C4 CEC backplane fault Replace the CEC backplane,
Location: U0.1-P1
460C 287A CEC backplane Replace the CEC backplane,
Location: U0.1-P1
460C 28C4 CEC backplane fault Replace the CEC backplane,
Location: U0.1-P1
460D 287A CEC backplane Replace the CEC backplane,
Location: U0.1-P1
460D 28C4 CEC backplane fault Replace the CEC backplane,
Location: U0.1-P1
460E 287A CEC backplane Replace the CEC backplane,
Location: U0.1-P1
460E 28C4 CEC backplane fault Replace the CEC backplane,
Location: U0.1-P1
460F 287A CEC backplane Replace the CEC backplane,
Location: U0.1-P1
460F 28C4 CEC backplane fault Replace the CEC backplane,
Location: U0.1-P1
4B23 26F6 Description: 1-way processor card fault
Action: This error code indicates that the processor repeat gard function has
deconfigured a processor. Do the following:
1. Go to the processor configuration/deconfiguration menu, located under the
system information menu in the service processor menus.
Look at the status of the processors. If any of the processors have a status of
″
manually deconfigured
″
, reconfigure the processor(s) and boot the system to
the SMS menus. Power down the system using the white power button and
look again at the status of the processors. If all of the processors are still
configured in the processor configuration/deconfiguration menu, the problem
has been resolved.
If any of the processors have a status of
″
deconfigured by the system
″
, either
before or after the boot to the SMS menus, go to step 2.
2. Replace the processor card (on which the deconfigured processor resides)
specified by the location code.
Chapter 5. Error Code to FRU Index
249