IBM eserver 630 6C4, Service Manual

Page: 355 / 573

Selecting the Adapter Parameters option allows you to view an adapter’s hardware
address, as well as configure network adapters that require setup. A menu similar to the
following displays.
Device Slot Hardware Address
1. 10/100 Ethernet Adapter 4:U0.1-P1-I4/E1 000629aca72d
2. 10/100 Ethernet Adapter Integrated:U0.1-P1/E1 0020357A0530
3. High Speed Token-Ring Adapter 1:U0.1-P1-I1/T1 000629be04e1
4. Gigabit Ethernet PCI Adapter 3:U0.1-P1-I3/E1 0004ac7c9ec7
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Entering adapter parameters on these screens will automatically update the parameters
on the ping test screen.
Selecting an adapter on this menu displays configuration menus for that adapter:
10/100 Ethernet TP PCI Adapter
1. Data Rate [Auto]
2. Full Duplex [Yes]
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Chapter 8. Using System Management Services
335