IBM eserver 630 6C4, Service Manual

Page: 248 / 573

Table 6. Service Processor Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
4503 26FF Description: 1-way processor card fault
Action: This error code indicates that the processor repeat gard function has
deconfigured a processor. Do the following:
1. Go to the processor configuration/deconfiguration menu, located under the
system information menu in the service processor menus.
Look at the status of the processors. If any of the processors have a status of
″
manually deconfigured
″
, reconfigure the processor(s) and boot the system to
the SMS menus. Power down the system using the white power button and
look again at the status of the processors. If all of the processors are still
configured in the processor configuration/deconfiguration menu, the problem
has been resolved.
If any of the processors have a status of
″
deconfigured by the system
″
, either
before or after the boot to the SMS menus, go to step 2.
2. Replace the processor card (on which the deconfigured processor resides)
specified by the location code.
4503 301A Description: 128 MB DIMM fault
Action: This error code indicates that the memory repeat gard function has
deconfigured a quad of memory. Do the following:
1. Go to the memory configuration/deconfiguration menu, located under the
system information menu in the service processor menus.
Look at the status of the DIMMs. If any of the DIMMs have a status of
″
manually deconfigured
″
, reconfigure the DIMMs and boot the system to the
SMS menus. Shut down the system using the white power button and look
again at the status of the DIMMs.
If all of the DIMMs are still configured in the memory
configuration/deconfiguration menu, the problem has been resolved.
If any of the DIMMs have a status of
″
deconfigured by the system
″
, either
before or after the boot to the SMS menus, go to step 2.
2. Replace the quad of memory containing the DIMM specified by the location
code. The entire quad of memory must be replaced.
4503 301B Description: 1 GB DIMM fault
Action:This error code indicates that the memory repeat gard function has
deconfigured a quad of memory. Do the following:
1. Go to the memory configuration/deconfiguration menu, located under the
system information menu in the service processor menus.
Look at the status of the DIMMs. If any of the DIMMs have a status of
″
manually deconfigured
″
, reconfigure the DIMMs and boot the system to the
SMS menus. Shut down the system using the white power button and look
again at the status of the DIMMs.
If all of the DIMMs are still configured in the memory
configuration/deconfiguration menu, the problem has been resolved.
If any of the DIMMs have a status of
″
deconfigured by the system
″
, either
before or after the boot to the SMS menus, go to step 2.
2. Replace the quad of memory containing the DIMM specified by the location
code. The entire quad of memory must be replaced.
228 Eserver
pSeries 630 Models 6C4 and 6E4 Service Guide