IBM eserver 630 6C4, Service Manual

Page: 398 / 573

1 System Unit
2 Adapter Retainer Assembly (in the unlocked position)
3 Adapter Retainer Assembly (retainer seat down and the retainer clip in the
unlocked position)
4 Adapter Retainer Assembly (retainer seat down and the retainer clip in the
locked position)
5 PCI adapter face plate (dotted lines)
14. Replace the service access cover as described in “Service Access Cover
Replacement (Model 6C4)” on page 357 or “Service Access Cover Replacement
(Model 6E4)” on page 364.
15. If you are servicing a Model 6C4, push the system drawer back into the operating
position as described in “Returning the Model 6C4 to the Operating Position” on
page 356.
16. Connect the adapter cables.
17. Reconnect the power source to the system.
18. If you are servicing a Model 6C4, route the cables through the cable-management
arm.
19. Power on the system as described in “Starting the System” on page 350.
20. On a Model 6C4, close the rack doors.
On a Model 6E4, close the bezel door.
378 Eserver
pSeries 630 Models 6C4 and 6E4 Service Guide