IBM E10, Service Manual, Page: 200 / 279

Record any problems in Table 18.
Table 18. Safety Inspection Problems
Date Problem Found Date Corrected
Ensure you complete the Electrical Safety Training Course for IBM Service Support Representatives,
number 77170.
Unsafe Conditions
When first assembled, each 2105 rack, DDM bay and SSA DASD drawer has safety equipment installed to
protect the operators and service support representative from injury. This inspection checklist ensures that
all safety equipment and safety labels are installed on the 2105 rack, DDM bay and SSA DASD drawer.
Listed below are some safety conditions and hazards that can be present on the 2105.
v
A frame that is not grounded. This can cause a serious or lethal electrical shock.
v
Missing safety covers or safety shields. This can be a hazard to the customer and maintenance
personnel.
CAUTION:
Do not continue with the inspection if any unsafe conditions are present. (1052)
Note: This notice is translated into selected languages. See “Chapter 11: Translation of Cautions and
Danger Notices” on page 181.
Reference Items
The following items are supplied with the 2105 Model Exx/Fxx or 2105 Expansion Enclosure:
v
A machine history. If the history is not available, obtain a copy and continue with the inspection.
v
The IBM Enterprise Storage Server Service Guide, 2105 Models E10 and E20 book
The following information is not supplied with the 2105:
v
Electrical Safety for IBM Customer Engineers book
v
IBM Input/Output Equipment Installation Manual–Physical Planning book
v
The 2105 engineering change announcements (ECAs)
Safety
184
VOLUME 3, ESS Service Guide