IBM E10, Service Manual, Page: 124 / 279

Table 11. Firmware Checkpoints. (continued)
Checkpoint Description Action/ Possible Failing FRU
E171 Executing PCI-Delay function See note 1 on page 100.
E174 Establish host connection Refer to
″
MAP 4320: E1xx SCSI Hard Drive
Code Boot
″
in chapter 3 of the Enterprise
Storage Server Service Guide, Volume 1, for
general considerations.
The cluster bay is not able to boot from the
SCSI hard drive and is instead trying to boot
from the ethernet connection. Call the next
level of support.
Use the SMS Menu options to ensure the
default boot list is active which will attempt to
boot from the SCSI hard drive before the
network connection. Reference “Appendix B.
System Management Service Operation
Connection” on page 233.
Call the next level of support.
E175 BootP request See Checkpoint E174.
E176 TFTP file transfer See note 1 on page 100.
E177 Transfer failure due to TFTP error condition See note 1 on page 100.
E178 Create PCI token ring node See note 1 on page 100.
E17B Processor frequency measurement
1. I/O Planar Battery
2. I/O Planar
E180 SP Command setup See note 1 on page 100.
E183 SP Post See note 1 on page 100.
E190 Create ISA node See note 1 on page 100.
E193 Initialize Super I/O. See note 1 on page 100.
E196 Probe ISA bus. See note 1 on page 100.
E19B Create Service Processor node. See note 1 on page 100.
E19C Create tablet node. See note 1 on page 100.
E19D Create NVRAM node. See note 1 on page 100.
E19E Real time clock (clock) creation and initialization. Refer to error code 28030xxx in
“Firmware/POST Error Codes” on page 73.
E19F Create eeprom node. See note 1 on page 100.
E1AD See description of checkpoint E1DE. See note 1 on page 100.
E1B0 Create lpt node. See note 1 on page 100.
E1B1 Create serial node. See note 1 on page 100.
E1B2 Create audio node. See note 1 on page 100.
E1B3 Create 8042 node. See note 1 on page 100.
E1B6 Probe for (ISA) Key-Planar. See note 1 on page 100.
E1BA Enable L2 cache. See note 1 on page 100.
E1BB Set cache parms for burst. See note 1 on page 100.
E1BC Set cache parms for 512KB. See note 1 on page 100.
E1BD Probe for (ISA) mouse. See note 1 on page 100.
Codes
108
VOLUME 3, ESS Service Guide