IBM E10, Service Manual, Page: 189 / 279

ESC SRN Description of ESC and SRN
E250 48900 > 1 array member failed
E255 48950 Array rebuild failed, DDM caused
E260 49000 Array degraded, no available spare
E270 49100 Array exposed, no available spare
E290 49500 No spare available for array
E291 49501 Members do not meet expectation
E292 49502 Configuration time-out, multiple SSA errors
E500 2A106 Drawer power loss or controller card interrupt
E500 301C0 Drawer power loss or controller card interrupt
E500 60200 Drawer will not power on
E500 60220 Drawer power assembly check light on
E500 80200 Drawer will not power on
E501 8022X 7133 power supply in position X has failed
E601 8023X 7133 fan assembly in position X has failed
E700 1022F Drive over temperature
E800 49503 Power sense or controller card code load fail
EB00 31000 PRT detected DDM impending failure (member or spare)
ED01 80210 Controller card has failed
ED01 D8300 Diagnostic detected controller failure
ED03 D8000 Diagnostics cannot access controller
Service Request Numbers (SRN)
The following SRNs are sometimes found without an 1xxx ESC.
These SRNs may also occur with an 1xxx ESC.
Table 17. 2105 Service Request Number (SRN) Descriptions
SRN Description of SRN
20XXX Open SSA link
21XXX Link threshold, no characters received
22XXX Link threshold, remote port disabled
23XXX Link threshold, link reset failed
24XXX Link threshold, retry limit exceeded
25XXX Link threshold, hardware error
26XXX Link threshold, frame reject
27XXX Link threshold, invalid retry status
28XXX Link threshold, time-out disable state
29XXX Link threshold, time-out ready state
2A106 Multiple DDMs detected redundant power loss
2A206 DDM SSA link failed POST
301C0 Multiple DDMs detected redundant power loss or controller interrupt
31000 PRT detected DDM impending failure or reset threshold exceeded
2105 Exception Symptom Codes
Error Messages, Diagnostic Codes, and Service Reports, CHAPTER 9
173