IBM E10, Service Manual, Page: 179 / 279

ESC Description of ESC
3584 ESCON adapter Error: ppc srr1 (ape) active
3585 ESCON adapter Error: ppc srr1 (tea) active
358C ESCON adapter Error: flash ROM write error
358D ESCON adapter Error: memory read parity error
358E ESCON adapter Error: PCI error
358F ESCON adapter Error: illegal L2 copy-back error
3590 Message LRC error - temporary
3591 Message LRC error - fence CPI
3592 Message LRC error - fence cluster bay
3593 Message LRC error - fence adapter
Microcode Detected Error Exception Symptom Codes
The following ESC code values set during MDE error analysis. The allocated ESC range for MDE errors is
’3200’x to ’32FF’x and ’3800’x to ’38FF’x.
ESC Description of ESC
3800 Cluster Heartbeat failure for cluster bay in service
3801 Cluster Bay 1 Heartbeat Fail
3802 Cluster Bay 2 Heartbeat Fail
3805 IOCTL Requested fence of Cluster Bay 1
3806 IOCTL Requested fence of Cluster Bay 2
3807 IOCTL Requested fence of RPC-1
3808 IOCTL Requested fence of RPC-2
380A Adapter BUS PCI reset failure
3810 RPC-1 heartbeat failure
3811 RPC-2 heartbeat failure
3812 RPC-1 fenced, permanent error logging was deferred
3813 RPC-2 fenced, permanent error logging was deferred
3814 RTAS failure communicating with RPC-1
3815 RTAS failure communicating with RPC-2
3816 RTAS failure communicating with RPC-1 during IML
3817 RTAS failure communicating with RPC-2 during IML
3818 RTAS failure communicating with RPC-1 w/cluster bay in service
3819 RTAS failure communicating with RPC-2 w/cluster bay in service
381A RTAS failure communicating with RPC-1 with it in service
381B RTAS failure communicating with RPC-2 with it in service
381C RPC missing interrupt RPC-1 verification testing
381D RPC missing interrupt RPC-2 verification testing
381E RPC missing interrupt RPC-1 IML verification testing
381F RPC missing interrupt RPC-2 IML verification testing
3820 RPC lock failure during RPC-1 verification testing
2105 Exception Symptom Codes
Error Messages, Diagnostic Codes, and Service Reports, CHAPTER 9
163