IBM E10, Service Manual, Page: 187 / 279

ESC SRN Description of ESC and SRN
C210 41008 DRAM failed (module 1) - 8 MB
C210 41016 DRAM failed (module 1) - 16 MB
C210 41032 DRAM failed (module 1) - 32 MB
C210 41064 DRAM failed (module 1) - 64 MB
C210 41128 DRAM failed (module 1) - 128 MB
C300 42000 Both DRAMs failed
C510 504xx SSA device card, microcode hung, hardware?
C520 50012 SSA microcode hung, hardware?
SSA Device Card Exception Symptom Codes
The following ESC code values are set during SSA device card error analysis. The allocated ESC range
for SSA device card errors is ’CF00’x to ’CFFF’x.
ESC Description of ESC
CF01 SSA device card not available
CF02 IOCTL requested fence of SSA device card error
CF10 Microcode detected SSA device card error - temporary
CF20 Microcode detected SSA device card error - permanent
CF21 Microcode detected SSA device card adapter error while in Service
CF30 Hardware detected SSA error - temporary
CF40 Hardware detected SSA error - permanent
CF41 Hardware detected SSA error while in service mode
CF50 SSA device card failed heartbeat, temporary error
CF60 SSA device card failed heartbeat, permanent error
CF61 SSA device card failed heartbeat while in service
CF70 DA requested SSA device card reset
CF80 Unknown detected SSA error - temporary
CF90 Unknown detected SSA card error - permanent
CF91 Unknown detected SSA card error while in service
CFA0 Logical disk failure
CFA1 Rank layout failure
CFA2 Permanent error
CFA3 Permanent error while in service
CFA4 DA non-error log entry
SSA Device Card Link Exception Symptom Code and Service Request
Numbers
The following ESC and SRN code values are set during SSA link error analysis. The allocated ESC range
for detected errors is ’D100’x to ’D1FF’x.
Note: These SRNs may also occur with an ESC of 1xxx. See “Service Request Numbers (SRN)” on
page 173
2105 Exception Symptom Codes
Error Messages, Diagnostic Codes, and Service Reports, CHAPTER 9
171