IBM E10, Service Manual, Page: 133 / 279

Table 12. Service Request Numbers (continued)
Service
Request
Number
SRN
Src.
Failing
Function
Codes
Description and Action
651-160 D 2E0 Description: I/O planar sensor indicates a fan is turning too slowly.
Note: Go to
″
MAP 4740: Fan Check Detected by I/O Planar
″
in chapter 3
of the Enterprise Storage Server Service Guide, Volume 1.
651-161 D 152 2E2 Description: Sensor indicates a voltage is outside the normal range.
651-162 Description: See SRN 651-152
651-170 D Description: Sensor status not available.
Action: Contact your next level of support.
651-171 D Description: Sensor status not available
Action: Contact your next level of support.
651-600 G Description: Uncorrectable memory or unsupported memory.
Action: Examine the memory modules and determine if they are supported
types. If the modules are supported, then replace the appropriate memory
module(s).
651-601 G Description: Missing or bad memory
Action: If the installed memory matches the reported memory size, then
replace the memory: otherwise, add the missing memory.
651-603 G 2C6 2C7 Description: Bad or missing memory
651-605 G 2C6 Description: Failed memory module
Action: The most probable failure is the memory module paired with the
memory module identified by the location code.
651-608 G D01 Description: Bad L2 Cache
651-609 G D01 Description: Missing L2 Cache
651-610 G 210 Description: CPU internal error
651-611 G 210 Description: CPU internal cache error
651-612 G D01 Description: L2 Cache parity or multi-bit ECC error
651-613 G D01 Description: L2 cache ECC single-bit error
651-614 G 214 Description: Time-out error waiting for memory controller
651-615 G 292 Description: Time-out error waiting for I/O
651-619 G Description: Problem log analysis indicates an error detected by the CPU.
The error log indicates the following physical FRU location(s) as the
probable cause(s).
Action: Use the physical location codes to replace the FRUs that are
identified on the problem detail screen.
651-621 and
651-623
G 2C6 Description: Correctable error threshold exceeded
651-624 G 214 Description: Memory controller internal error
651-625 G 214 Description: Memory Address (Bad address going to memory)
651-626 G 214 Description: Memory Data error (Bad data going to memory)
651-627 G 214 Description: Memory time-out error
651-628 G 210 Description: Processor time-out error
Codes
Error Messages, Diagnostic Codes, and Service Reports, CHAPTER 9
117