IBM E10, Service Manual, Page: 167 / 279

ESC Description of ESC
29AC SCSI DRAM Multi-bit ECC Error
29AD SCSI Unknown/Invalid Sequencer Check
29B0 SCSI DRAM Page Overflow Error
29B1 SCSI Uncorrectable DRAM Error
29B2 SCSI DRAM Single Bit Error
29B3 SCSI DRAM Range Error
29B4 SCSI Data To DRAM Parity Check
29B5 SCSI Unknown/Invalid DRAM Interrupt
29B6 SCSI DRAM Interrupt Without Further Detail
29BA SCSI Posted Write Error
29BB SCSI MIRV Interrupt
29BC SCSI PCI System Parity Error
29BD SCSI PCI Data Parity Error
29BE SCSI Signalled Target Abort
29BF SCSI Received Target Abort
29C0 SCSI Received Master Abort
29C1 SCSI Selected w/ No Paths Available
29C2 SCSI ZMBA Error
29C3 SCSI ZMBA Interrupt Active
29C4 SCSI Timer Interrupt Active
29C5 SCSI Path Register RAM Parity Error
29C6 SCSI MMIO RAM Parity Error
29C7 SCSI PCB Load Error
29C8 SCSI DDS Error
29C9 SCSI Initiator Link Cmd Complete
29CA SCSI Invalid Phase Change Detected
29CB SCSI Self Selected
29CC SCSI Logically Bad Header Hit
29CD SCSI Non Zero Status
29CE SCSI Restore w/o Previous Save Ptr
29CF SCSI Selection Time-out
29D0 SCSI Command Phase Error
29D1 SCSI Bus Free Phase Error
29D2 SCSI Overlength Error Suppress
29D3 SCSI Invalid LUN Error
29D4 SCSI Invalid Queued Tag
29D5 SCSI Raise Overlength Error
29D6 SCSI LRC Error
29D7 SCSI Byte Count Not Zero
29D8 SCSI PCI Error On Warhead
29D9 SCSI FIFO Parity Error
2105 Exception Symptom Codes
Error Messages, Diagnostic Codes, and Service Reports, CHAPTER 9
151