124
Event action
Description
Mode*
1
A
B
C
Alarm action
Send a mail that notifies of
an event occurrence
An e-mail notifying of the event and its date & time
(alarm mail) will be sent to registered e-mail
addresses (up to 4).
●
×
×
Provide an alarm notification
to a PC according to the
TCP alarm notification
setting
When an event occurs, a notification will be sent to a
PC in accordance with the settings made under
[TCP alarm notification]. (
☞
●
×
×
Notify PC of alarms
according to HTTP alarm
settings
When an event occurs, the PC is notified of the event
according to the "HTTP alarm" settings. (
☞
●
×
×
Display the images on a
1-screen when an alarm
occurs
Display the images recorded by the camera
associated with the alarm number on a 1-screen
●
×
×
*1
○
: Takes action regardless of the setting,
●
: takes action in accordance with the setting, ×: takes no action
*2 When "On" is selected for the "Additional alarm data" setting of the camera, i-VMD type information will be
displayed in the alarm log. For further information, refer to the operating instructions of the camera in use.
*3 The extension software alarm is displayed by name (
☞
page 49). Alarms notified by message IDs that are
not set are displayed as "Undefined".
*4 The extension software alarm notified by message IDs that are not set (
☞
page 49) is recorded as camera
site alarm.
Stop buzzer beeping
The buzzer sounding to announce an alarm or error can be stopped from the recorder’s front panel.
Step 1
Press the [BUZZER STOP] button.
(
WJ-NU101K)
→
→
The buzzer will stop.
Note:
• The buzzer can also be stopped by canceling the alarm action or error action. (
☞
STOP] button does not reset any of the other alarm actions.
[Operation via recorder's main monitor]
