80
Configure the security settings [Security]
Set the security settings on the security function page of [Advanced setup] on the setup menu.
■
Security between this product and PC
Connect the recorder and the PC with the HTTPS.
The HTTPS encodes the access to the recorder and
enhances the safety of the communication.
[Connection]
Set the connection.
HTTP & HTTPS: The HTTP and HTTPS
connections are available.
HTTPS: The HTTPS connection is only available.
Default:
HTTPS
[HTTPS port number]
Set the port number used for the HTTPS.
1 - 65535
Default:
443
Note:
• The following numbers, the HTTP port number,
the site alarm receive port number and the port
number of the port forwarding are unavailable.
20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110,
123, 161, 162, 546, 547, 995, 10001, 10002,
10003, 10004, 10005, 10006, 10007,
50000~50255
■
Security between this product and camera
HTTPS is used to connect between this product and
the camera. By using HTTPS, communication with
the camera can be encrypted and secure.
Note:
• If the server certificate has expired, "-(expired)"
will be displayed in the error information column.
• When the connection method with the camera is
set to "Internet mode", the image data
communication is also encrypted, thus further
increasing the security of the connection.
• Cameras whose part number is "RTSP" or
"RTSP(FE)" may not be able to connect via
HTTPS, depending on the camera used.
[Connection]
Set the connection method between this product and
the camera. Clicking the [Settings>] button will open
the "Change connection" window, where you can
change the settings. After changing the settings, click
the "OK" button to save the settings and return to the
[Security] tab.
[Connection]
Set the connection method between this product and
the camera.
HTTP: Connect via HTTP.
HTTPS: Connect via HTTPS.
Default:
HTTP
[Port number]
HTTPS port number used by this product for SSL
communication with the camera set.
1 - 65535
Default:
443
[Setup transmission]
Select the camera to which you want to send the
settings. Confirm the cameras to which you want to
send the configured connection method.
[Setup via recorder's main monitor]
