51
Note:
• All images may not be acquired at one time due to
the time between time tables of the schedule and
the total capacity of the images. The remaining
images will be acquired at the subsequent
acquisition time.
• The image is not acquired during the following
cases. Playing the image/HTTP downloading/
Emergency recording
• If the following operations occur during acquiring
the SD memory data, the acquisition is paused.
Communication failure with the camera while
acquiring SD memory data/Entering in HDD
management page of [Advanced setup]
[Smart coding (GOP control)]
Select when you use the smart coding (GOP control)
function of the camera.
On (Advanced): Uses the smart coding.
Off: Does not use the smart coding.
For more information about this function, refer to the
Operating Instructions of your camera.
[Special days]
Assign a schedule of another day individually as a
special day.
For example, if you set "January 1st" to "Sunday", the
recording will be performed as on Sunday, no matter
which day of the week January 1st is actually on.
The following screen of the special day will be
displayed when the [Setup >] button is clicked.
[Month] [Day]
Select a date that you want to set as a special day.
[Mode]
Select a day whose schedule you want to use.
Default:
None
■
Other setup
[Make the frame rate of the pre-event recording to
the frame rate of the event recording]
Check to set the frame rate of the pre-event recording
to the frame rate of the event recording. Uncheck to
return the frame rate to the standard settings (the
frame rate of the schedule recording). The setting is
only effective for our cameras.
[Do not send the bit rate setting to a camera for
which the same frame rate is set for the basic
setup, event recording and emergency recording]
The bit rate setting is not sent to the camera for which
the same frame rate is set for each recording when it is
checked. The setting is only effective for our cameras.
[Extend an event recording during "MotionAlarm"
of ONVIF event]
When checked, the event recording that starts with
"MotionAlarm" in the ONVIF event notified by the
camera will be extended for the duration set in the
event recording duration (
☞
notification is received from the camera.
Note:
• Please be noted that if the communication is
temporarily interrupted due to the network
environment, the recording will continue until the
alarm operation is canceled unless an end
notification is received.
• In "Advanced camera site alarm setup" (
☞
Page
48), when one camera is set to "Recording
Camera" for multiple cameras, it may not work
properly.
[Setup via recorder's main monitor]
