117
Correct the fisheye image
The Fisheye image can be corrected and displayed while the fisheye image is displayed on the 1-screen in the
image display area of the control screen.
Note:
• The fisheye correction display is not available in wide view and on the multiscreen.
The fisheye correction display button is not displayed.
• When a 4K monitor is connected to the main monitor and a sub-monitor is also used, fisheye image correction
display and re-encoding transmission cannot be used at the same time. Re-encoding transmission will stop if
the corrected display of the fisheye image is performed during re-encoding transmission.
Step 1
Confirm that the image display area is set to the 1-screen
display of the fisheye image on the control screen.
Step 2
Click the 1-screen PTZ display/4-screen PTZ display
button.
→
→
Corrects the fisheye image and displays on the
1-screen PTZ/4-screen PTZ. Images of the
following angle of view will be displayed
respectively.
■
1-Screen PTZ display
Fisheye
After 1-screen correction
■
4-Screen PTZ display
1
3
2
4
1
3
2
4
Fisheye
After 4-screen correction
Fisheye correction display button
Note:
• Double-click of the right mouse button on the
fisheye image can correct the image and display
on the 1-Screen PTZ centering the cursor
position.
• Click on the image during the 1-Screen PTZ
correction display can change the center to the
clicked position. Click an image that you want to
change the display position, and then click on the
image during the 4-Screen PTZ correction display.
• The clicked position may not come to the center
depending on the clicked position.
• Digital zoom (
☞
correction display.
• The correction display position of the fisheye
image cannot be changed by operating the
buttons on the camera control panel (
☞
page
• Double-click on the image during the 4-Screen PTZ
correction display can switch the screen to the
1-Screen PTZ correction display (and vice versa).
• The high resolution image and high frame rate
image may not be corrected and displayed based
on the original frame rate.
Step 3
Click of the fisheye display button releases the
correction function.
Note:
• The correction display position of the fisheye
image is recorded after the recorder is turned off.
If the fisheye image is corrected and displayed in
1-Screen PTZ after the recorder is turned on, it
will be corrected and displayed on the previous
position immediately before it was turned off.
• The split line is displayed on the image in a
moment when the correction function is canceled
from the 4-Screen PTZ correction display.
[Operation via recorder's main monitor]
