144
Step 5
Enter the password using on-screen keyboard, and
then click the [Next] button.
• Enter 5 to 8 alphanumeric characters for a
password.
• To confirm the password, enter the same
password again into the "Retype password"
column.
• To save the entered password, check "Memorize
password temporarily". The next time data is
copied, the password entry window will open with
the password already filled in. The password will
be retained in memory until the power of the
recorder is turned off.
→
→
The copy start confirmation window will be
displayed.
Step 6
Click the [OK] button in the copy start confirmation
window.
→
→
Switches to the copying window and displays
copying progress.
Important:
• Do not disconnect the external storage device
when copying is being performed. Otherwise the
data stored on the external storage device could
be lost.
• If the copy destination lacks sufficient remaining
storage capacity, copying will continue until the
medium is full. Use a medium with sufficient
storage capacity to avoid left over data that is not
copied.
• Copying will be performed in the following order:
Viewer Software
→
Images
→
Audio Depending
on the designated time range for copying and the
remaining space of the storage medium, images
and audio may not be copied.
• Clicking the [Copy] button during the copying
process will display the copying window. Clicking
the [Cancel] button will display the copy cancel
confirmation window. Copying continues while the
copy cancel confirmation window is displayed.
• Do not turn off the power of the recorder while
copy is in progress. If the power is turned off while
copying, the storage media copied on will become
unusable.
• Recorded images (data) of up to 1 million can be
copied onto the external storage device. However,
it is impossible to copy any more data exceeding
these limits even when there is a sufficient
remaining capacity.
• Due to characteristics of the file system, the
copying time becomes longer as the number of
recording data copied to the external storage
device at one time increases. To copy a massive
number of files, keep the number of files to handle
at one time less than 10000. And every time the
copy is finished, it is recommended to disconnect
the memory device and connect it again.
• The progress of the copy is calculated based on
the size displayed as "Data size". If copying more
than 10000 files, correct value will not be
displayed.
Step 7
Once the copying process is completed, the copy
complete window will be displayed. Click the "Close"
button and remove the external storage device.
Note:
• Usage time varies depending on the capacity of
the external storage device or the recording
content. Retry again later if you fail in operation.
[Operation via recorder's main monitor]
