Hughes HX100, Installation Manual

Page: 95 / 138

Chapter 7 • The System Control Center
1037106-0001 Revision B.03-Draft
77
Transmission
Information page
The Transmission Information page shown in Figure 47 displays
remote terminal transmit data such as transmit status, the number
of packets submitted for transmission, the number of successful
transmissions, and the number of failed transmissions. Each of
these fields is described below.
•
Transmit status -
provides the status of the transmit data path.
Click on the blue status message to display relevant Help
information.
Transmit status messages on page 78 describes
the associated TxCodes in detail.
•
Number of successful transmissions -
reports the number of
frames transmitted to the satellite.
•
Number of failed transmissions -
reports the number of
frames that could not be sent. A continuously increasing
value indicates a transmit problem. However; a low number
of failed transmissions is no reason for concern, as long as the
number does not increase and the system is functioning
properly.
•
Number of packets submitted for transmission - indicates the
total amount of data queued for transmission to the satellite.
Figure 47: Transmission Information page