Hughes HX100, Installation Manual

Page: 54 / 138

Chapter 4 • Commissioning the HX50/HX100 Remote Terminal
36
1037106-0001 Revision B.03-Draft
SiteID_Registration
. If you are unsure of which server to
select, refer to the installation specification or work order.
You may also manually enter the registration server address
by following these steps:
a. Select the
Enter Registration Server address manually
check box.
b. Enter the registration server’s address in the
HTTP://
field.
c. Select the
Secure HTTP Mode
check box to enable a
secure connection to the registration server.
13. Click Next .
The satellite connection is established.
14. Click Next when prompted to do so.
15. Click OK on the pop-up dialog shown in Figure 25 to access
the registration server.
16. If the Security Alert pop-up dialog appears as shown in
Figure 26, click Yes to accept the security certificate.
17. Enter the enterprise customer’s site ID on the enterprise
registration screen shown in Figure 27 and click Continue .
Figure 25: Accessing the registration server
Figure 26: Accepting the security certificate