Hughes HX100, Installation Manual

Page: 21 / 138

Chapter 1 • Introduction
1037106-0001 Revision B.03-Draft
3
AC/DC power supply for
2 W radio (64W)
Electrical requirements:
• Input line voltage
• Input line frequency
• Rated power
consumption
Power cord
PN 1031105-0001
100 - 240 V - 2A max
50-60 HZ AC
64 W
Detachable power cord for 110 VAC outlet
type
DC/DC power supply
Electrical requirements:
• Input line voltage
• Rated power
consumption
Power cord
PN 1033554-0001
12.7 - 25 V - 10A max
64 W
Detachable power input cables and
connector
Safe operating temper-
ature range 0 to 40 degrees C (above 5000 feet
altitude, reduce maximum temperature by
1 degree C per 1000 feet)
Safe operating humidity 5% to 95% non-condensing
Safe altitude 10,000 ft.
Cooling method Convection
Interfaces/ports • Two Ethernet ports supporting 10BaseT
or 100BaseT operation, RJ45-switched
• Telephone line port
• Serial port, DTE/DCE RS-232, which
supports the following protocols:
– VISA (Veriphone 3200 and 3300) (the
asynchronous protocol of Vanguard
International Service Association credit
card)
– X.25 International Telecommunication
Union-Telecommunication
Standardization Sector (ITU-T)
protocol standard for WAN
communications)
– XPAD (X.25 Packet
Assembler/Disassembler)
– DSPAD (IBM 3270 Display System
Protocol)
– SDLC (Synchronous Data Link
Control)
– LLC (Logical Link Control)
Main processor 133 Mhz, MIPS
Table 1: HX50 equipment specifications (Continued)
Product Element Specification