IMF204-2F Series
Ring Network Serial to Fiber MODEM
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Song Bai Road, Nanshan
District, Shenzhen, 518108, China
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【
Package Checklist
】
Please check whether the package and accessories are intact
while using the device for the first time.
1 Serial to fiber MODEM
2 Quick installation guide
3 Lug x2
4 Power line ( AC
standard feature )
5 Warranty card
6 Certification
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【
Product Overview
】
The products of this series are industrial unmanaged ring
network serial to fiber MODEM, Models are as follow:
Model I. IMF204-2F-4DI(RS-485)-P(12~48VDC) (2 fiber
inte 4 RS-485 serial ports, 12~48VDC)
Model II. IMF204-2F-4DI(RS-485)-P(100~240VAC) (2 fiber
inte 4 RS-485 serial ports, 100~240VAC)
【
Panel Design
】
Front View
Rear View
Model I
Model II
1.
Serial port transmitting and receiving data
indicators
2.
Fiber port connection status indicator
3.
Master/Slave device status indicator
4.
Running status indicator
5.
DIP switch
6.
Console port
7.
Fiber interface
8.
RS-485 serial port
9.
Terminal block of 12~48VDC power supply input
10.
Terminal block of 100~240VAC power supply input
【
Mounting Dimension
】
Unit: mm
Note before mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【
Wall-mounted Device Mounting
】
Step 1
Adopt a M3 screw to install the left/right mounting
board on the device backboard.
Step 2
On the wall of device mounting, place the device on
the wall for reference or refer to the mounting
dimension to mark two screw positions.
Step 3
Attach the equipment to the marked wall and
