Hughes HX100, Installation Manual

Page: 133 / 138

Appendix D • Conforming with standards and directives
1037106-0001 Revision B.03-Draft
115
and modular plug is provided with this product. It is required to
be terminated with a plug type 605 or a FCC plug type 6 position
for Australia.
Ringer equivalence number
(REN)
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on the telephone
line may result in the devices not ringing in response to an
incoming call. In most, but not all areas, the sum of RENs should
not exceed five (5.0). To be certain of the number of devices that
may be connected to the line, as determined by the total RENs,
contact the local Telephone Company. For products approved
after July 23, 2001, the REN for this product is part of the product
identifier that has the format US:5L4DT##B1032021.
The digits represented by the ## are the REN without the decimal
point (e.g., 00 is a REN of 0.0). For earlier products, the REN is
separately shown on the label.
If the Two-Way Hughes System causes harm to the telephone
network, the Telephone Company will notify you in advance that
temporary discontinuance of service may be required. But if
advance notice isn’t practical, the Telephone Company will
notify the customer as soon as possible. Also, you will be advised
of your right to file a complaint with the FCC if you believe it is
necessary.
If you have been told to discontinue phone service and you
believe it is due to the HX50 or HX100 terminal, please contact
Hughes Customer Support. If you purchased your HX50 or
HX100 from one of our value added resellers (VARs), please do
not contact Hughes. Contact your VAR according to the
procedure supplied by them for technical support. They are
trained to help you with your technical problem. If you are a user
outside the United States, please contact your service provider.
The Telephone Company may make changes in its facilities,
equipment, operations, or procedures that could affect the
operation of the equipment. If this happens, the Telephone
Company will provide advance notice in order for you to make
the necessary modifications to maintain uninterrupted service.
CAUTION
To reduce the risk of fire, use only No. 26 AWG or larger UL
Listed or CSA Certified Telecommunication Line Cord.