Hughes HX100, Installation Manual, Page: 103 / 138

Chapter 7 • The System Control Center
1037106-0001 Revision B.03-Draft
85
–
Receive Polarization
- polarization orientation; either
horizontal or vertical.
– Router Address - IP address of the primary GTWY router
used to route data sent by the remote terminal.
•
Software Configuration section - network address translation
(NAT), DHCP, Firewall, and Turbo Page features are
enabled or disabled at the HX GTWY and cannot be changed
by the remote user.
– Network Address Translation (NAT) - typically used to
allow multiple computers to share a single address on the
Internet. It also allows pre-configured remote networks to
be integrated easily with the HX system network.
–
Dynamic Host Configuration Protocol
(DHCP) if enabled,
simplifies network configuration of the computers. The
computers need only to be set up to “Obtain IP address
automatically.”
–
Turbo Page
- if enabled, speeds web surfing.
–
Firewall
- if enabled, allows you to specify packet filtering
rules.
•
Transmit Radio Info
–
Transmit Radio Wattage
- May list either the wattage or
the transmit radio part number, depending on which was
selected during the commissioning process. See Chapter 4
–
Commissioning the HX50/HX100 Remote Terminal for
details.