manualshive.com logo in svg

Hubbell GARD Pro, Instruction Manual

The Hubbell GARD Pro is a versatile outdoor lighting fixture designed to enhance security and visibility. Ensure optimal performance by referring to the Instruction Manual available for free download from manualshive.com. This comprehensive manual provides step-by-step guidance for easy installation and maintenance of this high-quality product.

Share
Download
background image

RF-MCGARDPRO 

 

 

 

 

 

 

    Hubbell Power Systems, Inc. 

–

 

RFL™ 

Products

 

July 1, 2022 

 

©2022 Hubbell Incorporated 

1-5 

List of figures 

Figure 1-1.  Location of Protective Earth Stud .......................................................................... 1-1

 

Figure 1-2.  External Labels, Warnings and Cautions ............................................................... 1-4

 

Figure 2-1.  The HPS/RFL GARD Pro System ......................................................................... 2-1

 

Figure 2-2.  Supplied Drawings ................................................................................................. 2-2

 

Figure 2-3.  Example User System Label .................................................................................. 2-3

 

Figure 2-4.  Module Placement in the HPS/RFL GARD Pro System (3U) ............................... 2-5

 

Figure 2-5.  Module Placement in the HPS/RFL GARD Pro System (6U) ............................... 2-6

 

Figure 2-6.  Programmable LEDs .............................................................................................. 2-7

 

Figure 2-7.  Base Input/Output Unit showing Plug-On Boards ................................................. 2-8

 

Figure 2-8. Top and Front views of Comms I/O Base module .................................................. 2-9

 

Figure 2-9.  GPS Antenna ........................................................................................................ 2-11

 

Figure 2-10.  Location of Synchronous multi-protocol interface ............................................ 2-12

 

Figure 2-11.  HPS/RFL GARD Pro Display Card and Digital Teleprotection Slot locations . 2-13

 

Figure 2-12.  HPS/RFL GARD Pro System Front Panel, Indicators/Connections .................. 2-14

 

Figure 2-13.  Graphical User Interface .................................................................................... 2-15

 

Figure 2-14.  Chassis Configuration Status web page for 6U Chassis with Redundancy ....... 2-19

 

Figure 2-15.  Chassis Configuration Status web page for 6U Chassis with  Unhealthy Inactive 
Controller ................................................................................................................................. 2-19

 

Figure 2-16.  Touch Screen Display in 3U Chassis. ................................................................ 2-20

 

Figure 2-17.  System Information ............................................................................................ 2-21

 

Figure 2-18.  Events Log (SOE’s) ........................................................................................... 2-21

 

Figure 2-19.  Push Button Menu .............................................................................................. 2-22

 

Figure 2-20.  Test Menu........................................................................................................... 2-22

 

Figure 2-21.  Inventory Menu .................................................................................................. 2-23

 

Figure 3-1.  Mounting dimensions for the HPS/RFL GARD Pro system chassis ..................... 3-3

 

Figure 3-2.  System Module I/O Connections ........................................................................... 3-5

 

Figure 3-3.  RS-485 DNP3 connection ...................................................................................... 3-7

 

Figure 3-4.  Network connections .............................................................................................. 3-8

 

Figure 3-5.  3U Chassis, System I/O Board Jumper Locations ............................................... 3-10

 

Figure 3-6.  IRIG-B with GPS ................................................................................................. 3-12

 

Figure 3-7.  RS-232 Pin-Outs .................................................................................................. 3-13

 

Figure 3-8.  Removing System I/O Board (3U) ....................................................................... 3-13

 

Figure 3-9.  Jumper Location for IRIG-B through Rear RS-232 Connector (3U) .................. 3-14

 

Figure 3-10.  Removing System I/O Board (6U) ..................................................................... 3-14

 

Figure 3-11.  Jumper Location for IRIG-B through Rear RS-232 Connector (6U) ................ 3-15

 

Figure 3-12.  Rear I/O Terminal Block Connections ............................................................... 3-16

 

Figure 3-13.  Relay Connections/Power Supply I/O ............................................................... 3-17

 

Figure 3-14.  Chassis Grounding Location .............................................................................. 3-17

 

Figure 3-15. Top and Rear views of Discrete I/O Base module .............................................. 3-20

 

Figure 3-16. Component side of Input Unit (RF-500805) ....................................................... 3-21

 

Figure 3-17. Top and Rear views of Discrete I/O Base module (continued) .......................... 3-22

 

Figure 3-18. Component side of Relay Output Unit (RF-500815) .......................................... 3-23

 

Figure 3-19. Top and Rear view of Discrete I/O Base module with Output unit .................... 3-24

 

Figure 3-20. Top and Front views of Comms I/O Base module .............................................. 3-26

 

Figure 3-21.  Panel views of various types of Comms I/O modules available ........................ 3-27

 

Figure 3-22. Pin-Outs RS-449, X.21, V.35.............................................................................. 3-29

 

Figure 3-23. Pin-Outs G.703 .................................................................................................... 3-30

 

Summary of Contents for GARD Pro


























































































































































































































































































































































Reviews:

No comments

Related manuals for GARD Pro

EBECO BHS Installation Instructions Manual preview
BHS
Brand: EBECO Pages: 8
Samsara VG54 Install Manual preview
VG54
Brand: Samsara Pages: 13
ARC ITB05 Manual preview
ITB05
Brand: ARC Pages: 8
Magnescale Digiruler PL20C series Instruction Manual preview
Digiruler PL20C series
Brand: Magnescale Pages: 84
Philips SWV7433W/10 User Manual preview
SWV7433W/10
Brand: Philips Pages: 1
Philips SWV7434W/10 User Manual preview
SWV7434W/10
Brand: Philips Pages: 1
Philips US2-P74800 Specification Sheet preview
US2-P74800
Brand: Philips Pages: 2
Philips Wall Jack SDJ8110W Specifications preview
Wall Jack SDJ8110W
Brand: Philips Pages: 2
Philips US2-P72810 Specifications preview
US2-P72810
Brand: Philips Pages: 2
Philips TRIPLEX JACK SDJ6070 Specifications preview
TRIPLEX JACK SDJ6070
Brand: Philips Pages: 2
Philips SWX1223 Specifications preview
SWX1223
Brand: Philips Pages: 2
Philips SWV7544W Specifications preview
SWV7544W
Brand: Philips Pages: 2
Philips SWX1233 Specification preview
SWX1233
Brand: Philips Pages: 2
Philips SWV7514W Specifications preview
SWV7514W
Brand: Philips Pages: 2
Philips SWX1237 Specifications preview
SWX1237
Brand: Philips Pages: 2
Philips SWV7541W Specifications preview
SWV7541W
Brand: Philips Pages: 2
Philips SWV7432W Specifications preview
SWV7432W
Brand: Philips Pages: 2
Philips SWV7543W Specifications preview
SWV7543W
Brand: Philips Pages: 2

Brands by name

Popular brands

Load more brands