System Configuration __________________________________________________________________
RF-MCGARDPRO
Hubbell Power Systems, Inc.
–
RFL™
Products
July 1, 2022
©2022 Hubbell Incorporated
4-4
5.
Select “Obtain an IP Address Automatically” and click “OK.”
Figure 4-6. Obtain an IP Address Automatically
6.
Verify that DHCP is enabled and that the IP address given starts with “192.168.”
You can now logon to the HPS/RFL GARD Pro system and access the built-in web server.
4.2.2 Configuring a PC using Static IP Addresses
Instructions on setting static IP addresses are detailed below.
1.
Follow the previous screens until you reach the screen above. Select “Use the
Following IP Address” and enter the IP and Subnet Mask address as shown below.
Figure 4-7. Use the Following IP Address
