Digital Teleprotection __________________________________________________________________
RF-MCGARDPRO
Hubbell Power Systems, Inc.
–
RFL™
Products
July 1, 2022
©2022 Hubbell Incorporated
6-14
5.
Select the Interface (digital comms card) to handle that function
Note
: If you select the same “Slot # - card” all the timeslots in the range are assigned to
that card. The gray “Slot 4 – RS 449” show those Timeslots were assigned
automatically when the user selected RS 449 for timeslot 6.
Note
: Once an Interface or Function is assigned Communications Bus it will not be
available for use on the second Timeslot Bus.
6.
If you assign several timeslots to a single interface the associated functions are set to
“Idle”. Assign Functions to those Timeslots.
7.
Unassigned Timeslots are marked red indicating the assigned Interface needs a
Function. All Interfaces must have at least one Function though several Functions can
be assigned to consecutive Timeslots in one Interface.
