System Configuration __________________________________________________________________
RF-MCGARDPRO
Hubbell Power Systems, Inc.
–
RFL™
Products
July 1, 2022
©2022 Hubbell Incorporated
4-32
4.10
Front Panel LED Status and Configuration
The HPS/RFL GARD Pro system has 40 programmable LEDs. 20 Physical LEDs located on
the Front Panel, and an additional 20 virtual LEDs for display on the optional Front Panel
Touch Screen Display or from the User Interface. Both physical and virtual LEDs can be
configured to indicate states of the system. The physical and virtual LEDs are normally factory
set, but can be customized by the user through the GUI. An example status screen is shown
below followed by details on configuring the LEDs.
4.10.1 LED Status
Menu location: Status > LEDs >Front Panel LED’S (1-20) / Virtual LED’s (21-40).
It should be noted that the front panel LEDs can be programmed to illuminate green, orange or
red. These colors can be assigned by the user to indicate various status conditions.
Status of the LEDs
Global label
Status label of the LED
Status of the LED
Figure 4-31. LED Status
4.10.2 LED Configuration
Menu location: Configuration > LEDs.
The following web page is used to program the LEDs. Each LED can be assigned a “Global”
label and each color can be assigned a different label in the drop-down dialog box shown below.
