System Configuration __________________________________________________________________
RF-MCGARDPRO
Hubbell Power Systems, Inc.
–
RFL™
Products
July 1, 2022
©2022 Hubbell Incorporated
4-68
4.16.2.6.1 Deadband:
Specifies the integer value, in the units of the point type, by which an analog value must change
before it will be reported at the next poll or generating an unsolicited message, if configured.
The units used for the deadband setting depend on the measurement type. For example, Reflected
Power is measured in percent. So, a deadband setting of 20 requires the Reflected Power to
change by +/- 20% before the GARD Pro will report a change in value to the DNP master.
Figure 4-60. DNP Deadband
The “deadband” value operates per-point. Each point in the DNP analog settings has its own
deadband value which the user sets on this page.
