System Configuration __________________________________________________________________
RF-MCGARDPRO
Hubbell Power Systems, Inc.
–
RFL™
Products
July 1, 2022
©2022 Hubbell Incorporated
4-76
4.17
SNMP
4.17.1 Description
SNMP is supported on GARD Pro system firmware versions
2.2.0 or greater. The version can be
read on the System Management > Inventory & Version Info page. This provides
an SNMP Agent
which allows RTC (Real Time Clock) time stamped v2c SNMP Trap Messages to be sent via the
rear Ethernet port. These messages are triggered by changes in the HMI output bits as defined
by the HPS/RFL GARD Pro system logic. In addition, SNMP v3 GET functionality is supported,
allowing read access to the GARD Pro system parameters.
Starting with GARD Pro system firmware version 2.2.6 or greater, both SNMP Traps and Get
support v3 authentication and privacy.
The SNMP Agent does the following:
•
Provides SNMP Traps and Transmits RTC based time stamped alarms and other
events to the customer’s software management equipment based on custom
HPS/RFL GARD Pro system logic HMI output bit changes.
•
Supports up to five management IP addresses.
•
Supports the GET operation to view the values in the MIB.
