Huawei FusionServer Pro 2288H V5 User Manual Download

Page: 103 / 177

Figure 7-22

Connecting a serial cable

----End

7.2.6.8 Connecting PSU Cables

7.2.6.8.1 Connecting the AC PSU Cable

Before connecting power cables, ensure that the server has been correctly installed. For
details, see

7.2.5 Installing a 2288H V5

NO TICE

Use dedicated power cables to ensure equipment and personal safety.

Use power cables only for dedicated servers. Do not use them for other devices.

Connect the power cables of the active and standby PSUs to different power distribution
units (PDUs) to ensure reliable system operation.

Ground the equipment before powering it on.

Procedure

Step 1

Take the spare part out of its ESD bag.

Step 2

Connect one end of the power cable to the power socket on the PSU of the server.

FusionServer Pro 2288H V5 Server
User Guide

7 Installation and Configuration

Issue 08 (2019-10-30)

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands