Huawei FusionServer Pro 2288H V5 User Manual Download Page 89

Page: 89 / 177

7.2.5 Installing a 2288H V5

7.2.5.1 Installing a Server on L-Shaped or Adjustable Guide Rails

For details, see

7.2.4.1 Installing L-Shaped Guide Rails

7.2.4.2 Installing Adjustable

Guide Rails

Procedure

Step 1

Install the server.

NO TICE

At least two people are required to move the device. Otherwise, personal injury or device
damage may occur.

Lift the server, place it on guide rails, and slide it into the chassis. At least two people are
required to move the server. See (1) in

Figure 7-8

Align the mounting ears on both sides of the server with the mounting bars and tighten
the captive screws on the mounting ears. See (2) in

Figure 7-8

Installing the server

Step 2

Connect the power cables to the PSUs.

For details, see

7.2.6.8 Connecting PSU Cables

Step 3

Connect a network cable, a VGA cable, and USB devices as required.

Step 4

Power on the server.

For details, see

7.3.1 Power-On Procedure

FusionServer Pro 2288H V5 Server
User Guide

7 Installation and Configuration

Issue 08 (2019-10-30)

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands