Huawei FusionServer Pro 2288H V5 User Manual Download

Page: 85 / 177

7.2.4.1 Installing L-Shaped Guide Rails

L-shaped guide rails are designed for Huawei cabinets only.

The 2288H V5 servers are stackable onto L-shaped guide rails.

Procedure

Step 1

Install floating nuts.

Determine the installation positions of the floating nuts according to the cabinet device
installation plan.

Figure 7-3

Spacing of 1U on a mounting bar of a cabinet

–

Floating nuts are used to tighten screws.

–

The boundary between Us is used as the reference for calculating device installation space.

Fasten the lower end of a floating nut to the target square hole in a mounting bar at the
front of the cabinet.

Use a floating nut hook to pull the upper end of the floating nut, and fasten it to the upper
edge of the square hole.

FusionServer Pro 2288H V5 Server
User Guide

7 Installation and Configuration

Issue 08 (2019-10-30)

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands