Huawei FusionServer Pro 2288H V5 User Manual Download

Page: 151 / 177

News

For notices about product life cycles, warnings, and updates, visit

Support > Bulletins >

Product Bulletins

Cases

To learn server applications, visit

Support > Knowledge Base > Servers

Contact Huawei

Huawei provides comprehensive technical support and services. To obtain assistance, contact
Huawei technical support as follows:

Contact Huawei customer service center.

Enterprise customers in China:

–

Call 400-822-9999

–

Send emails to

[email protected]

Enterprise customers outside China: visit

Global Service Hotline

Telecom carriers in China:

–

Call 400-830-2118

–

Send emails to

[email protected]

Telecom carriers outside China: visit

Global TAC Information

Contact the technical support personnel of your local Huawei office.

10.2 Product Information

Table 10-1

provides common information about Huawei servers.

Table 10-1

Product information

Item

Description

How to Obtain

Server product
documentation

Server user guide, which
provides information about
the structure, specifications,
and installation of the
server.

Visit

Intelligent Servers

select a product model, and
view the

Documentation

tab page.

Intelligent Computing
Compatibility Checker

A tool used to query the
OSs, parts, and peripherals
compatible with a server.

Intelligent Computing
Compatibility Checker

Maintenance Information
Inquiry System

A system used to query the
service information about
servers.

Visit

Maintenance

Information Inquiry

FusionServer Pro 2288H V5 Server
User Guide

10 More Information

Issue 08 (2019-10-30)

143

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands