Huawei FusionServer Pro 2288H V5 User Manual Download

Page: 66 / 177

Product Specifications

3.1 Technical Specifications

3.2 Environmental Specifications

3.3 Physical Specifications

3.1 Technical Specifications

Table 3-1

Technical specifications

Category

Specifications

Form factor

2U rack server

Chipset

Intel

C621/Intel

C622

Processors

Supports one or two processors.

Intel

Xeon

Scalable (Skylake and Cascade Lake)

processors

Built-in memory controller and six memory channels

Built-in PCIe controller, supporting PCIe 3.0 and 48 lanes
per processor

Two UPI buses between processors, providing up to
10.4GT/s transmission per channel

Up to 28 cores (2.7 GHz)

Max. 3.8 GHz (four cores)

Min. 1.375 MB L3 cache per core

Max. 205 W TDP

NOTE

The preceding information is for reference only. Use the

Intelligent

Computing Compatibility Checker

to obtain specific information.

FusionServer Pro 2288H V5 Server
User Guide

3 Product Specifications

Issue 08 (2019-10-30)

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands