Huawei FusionServer Pro 2288H V5 User Manual Download Page 156 | Manualshive

Page: 156 / 177

background image

11.3 FusionServer Tools SmartKit

SmartKit is a tool kit integrating tools required for deploying, maintaining, and upgrading
servers in batches. It simplifies server O&M and improves O&M efficiency.

For more information about SmartKit, see

FusionServer Tools 2.0 SmartKit User Guide

lists the operations supported by SmartKit.

Table 11-1

Operations supported by SmartKit

Operation

Description

iBMC configuration

Perform iBMC configuration for servers in batches.

BIOS Configuration

Perform BIOS configuration for servers in batches.

HMM configuration

Perform HMM configuration for servers in batches.

V5 RAID configuration

Perform RAID configuration for servers in batches.

V2/V3 RAID
configuration

IP address configuration

Configure BMC IP addresses for servers in batches.

Health check

Perform health check for servers in batches. Visualized health
reports are provided, helping users to learn about the server
running status in real time.

Power control

Perform power control of servers in batches, including resetting
the iBMCs, and powering on or off or restarting servers in
batches.

Log collection

Collect the hardware and OS logs of servers in batches by
simply clicking the mouse.

Firmware update

Update the BMC, BIOS, CPLD, and Smart Provisioning
firmware of servers in batches.

PCIe card or drive
firmware update

Update the PCIe card firmware or drive firmware by mounting
the virtual media.

Upgrade evaluation

Perform an evaluation of E9000 switch modules in batches
before an upgrade.

E9000 upgrade

Upgrade the E9000 switch modules and E9000 chassis in
batches.

Device change

Allow specific functions to be automatically implemented by
using customized programs.

V5 configuration check

Check the iBMC, BIOS, and RAID configurations of V5
servers in batches.

FusionServer Pro 2288H V5 Server
User Guide

11 Software and Configuration Utilities

Issue 08 (2019-10-30)

Copyright © Huawei Technologies Co., Ltd.

148

«
...
154
155
156
157
158
...
»

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Reviews:

No comments

Related manuals for FusionServer Pro 2288H V5

Brand: Xerox Pages: 8

SUPERO SuperServer 6026TT-GIBQRF

Brand: Supero Pages: 104

Brand: Watchguard Pages: 32

xPico XPW100A003-01-B

Brand: Lantronix Pages: 54

Brand: IBM Pages: 82

Brand: Vxl Pages: 19

FusionServer XH321 V5

Brand: xFusion Digital Technologies Pages: 76

Brand: Acer Pages: 52

Brand: Acer Pages: 94

Altos R700 Series

Brand: Acer Pages: 135

Brand: Acer Pages: 10

Brand: Acer Pages: 148

Brand: Acer Pages: 108

Brand: Acer Pages: 118

Brand: Acer Pages: 78

Altos G700 series

Brand: Acer Pages: 126

Altos S700 Series

Brand: Acer Pages: 124

Brand: Acer Pages: 126

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands