l
If PSUs are properly installed but are not yet powered on, power on the PSUs.
The server will be powered on along with the PSUs.
By default,
System State Upon Power Supply
is set to
Power On
, which allows the server to
power on after the PSUs are applied with power. You can change the
System State Upon Power
Supply
on the
Power
>
Power Control
page on the iBMC WebUI.
l
If the PSUs are powered on and the server is in standby state (the power indicator is
steady yellow), you can use any of the following methods to power on the server:
–
Press the power button on the front panel.
For details, see
–
Use the iBMC WebUI.
i.
Log in to the iBMC WebUI.
For details, see
9.2 Logging In to the iBMC WebUI
ii.
Choose
Power
>
Power Control
.
The
Power Control
page is displayed.
iii. Click
Power On
.
A confirmation message is displayed.
iv. Click
Yes
.
–
Use the iBMC CLI.
i.
Log in to the iBMC CLI.
For details, see
ii.
Run the following command:
ipmcset -d powerstate -v 1
iii. Type
y
or
Y
and press
Enter
.
–
Use the Remote Virtual Console.
i.
Log in to the Remote Virtual Console.
For details, see
9.3 Logging In to the Desktop of a Server
.
ii.
On the KVM screen, click
or
on the toolbar.
iii. Select
Power On
.
A dialog box is displayed.
iv. Click
Yes
.
FusionServer Pro 2288H V5 Server
User Guide
7 Installation and Configuration
Issue 08 (2019-10-30)
Copyright © Huawei Technologies Co., Ltd.
99
