Huawei FusionServer Pro 2288H V5 User Manual Download Page 128

Page: 128 / 177

Figure 9-1

iBMC UI for login

Step 5

Select the language to be used.

Enter the user name and password.

The system provides a default user of the administrator group. The default user name is

Administrator

, and the default password is

Admin@9000

Domain

This iBMC

, the maximum length of the user name is 20 characters.

Domain

is not

This iBMC

, the maximum length of the user name is 255 characters.

Select

This iBMC

Automatic matching

from the

Domain

drop-down list.

Click

Log In

After the login is successful, the

Information

page is displayed. The user name is

displayed in the upper right corner.

The system may display a message indicating incorrect username or password when you
attempt to log in using Internet Explorer after the system is upgraded. If this occurs,
press

Ctrl+Shift+DEL

and click

Delete

to clear the browser cache. Then, attempt to log

in again.

If the login still fails, choose

Tools > Internet Options > Advanced

in the menu bar and

click

Reset

to restore default settings of Internet Explorer. Then attempt to log in again.

FusionServer Pro 2288H V5 Server
User Guide

9 Common Operations

Issue 08 (2019-10-30)

120

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands