Huawei FusionServer Pro 2288H V5 User Manual Download Page 152

Page: 152 / 177

Item

Description

How to Obtain

Huawei Server Power
Calculator

A tool used to calculate
server power consumption
based on the server
configuration.

Huawei Server Power
Calculator

10.3 Product Configuration Resources

Table 10-2

describes the common product configuration resources of Huawei servers.

Table 10-2

Product configuration resources

Resource

Description

How to Obtain

Removal and installation
videos

The videos show you how to
remove and install
hardware.

Multimedia Portal

DIMM Configuration
Assistant

An online application that
helps you configure memory
modules for a server. The
DIMM installation sequence
in a graphical manner will
be displayed after the
product name, CPU
quantity, and DIMM
quantity are specified.

Huawei Server Product
Memory Configuration
Assistant

10.4 Maintenance Tools

Table 10-3

lists the software tools required for routine maintenance of Huawei servers.

Table 10-3

Software tools for routine maintenance

Tool

Server Model
and Software
Version

Description

FusionServer
Tools InfoCollect

For details, see

FusionServer
Tools 2.0
InfoCollect User
Guide

InfoCollect collects server logs, which help you
locate faults.
Download link:

FusionServer Tools

FusionServer Pro 2288H V5 Server
User Guide

10 More Information

Issue 08 (2019-10-30)

144

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands