Huawei FusionServer Pro 2288H V5 User Manual Download

Page: 67 / 177

Category

Specifications

Memory

Supports 24 memory modules of the following types:

Up to 24 DDR4 memory modules

Max. 2933 MT/s memory speed

RDIMM and LRDIMM support

The DDR4 memory modules of different types (RDIMM
and LRDIMM) and specifications (capacity, bit width, rank,
and height) cannot be used together.

NOTE

The preceding information is for reference only. Use the

Intelligent

Computing Compatibility Checker

to obtain specific information.

FusionServer Pro 2288H V5 Server
User Guide

3 Product Specifications

Issue 08 (2019-10-30)

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands