Huawei FusionServer Pro 2288H V5 User Manual Download Page 142

Page: 142 / 177

Figure 9-15

PuTTY Configuration

Step 6

Set

Close window on exit

Only on clean exit

Set

Saved Sessions

and click

Save

. You can double-click the saved record in

Saved Sessions

to log in to

the server next time.

Step 7

Click

Open

The

PuTTY

screen is displayed. Then the message "login as:" is displayed, prompting you to

enter a user name.

If this is your first login to the server, the

PuTTY Security Alert

dialog box is displayed. Click

Yes

proceed.

Step 8

Enter the user name and password.

If the login is successful, the server host name is displayed on the left of the prompt.

----End

9.5 Configuring VMD Settings

The Intel Volume Management Device (VMD) is a module integrated in the processor on the
Purley platform. It is used for surprise hot plug, management, and error processing of SSDs.

FusionServer Pro 2288H V5 Server
User Guide

9 Common Operations

Issue 08 (2019-10-30)

134

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands