Huawei FusionServer Pro 2288H V5 User Manual Download

Page: 116 / 177

Upgrade the iBMC, BIOS, or CPLD.
For details, see

FusionServer Pro Rack Server Upgrade Guide

Step 4

Query health status.

On the menu bar, choose

Information

In the navigation tree, choose

Overview

to query the health status.

Figure 7-31

Querying health status

Step 5

Query alarm information.

Check whether any alarm is generated.

If yes, handle the alarms.
For details, see

FusionServer Pro Rack Server iBMC Alarm Handling

If no, no further action is required.

----End

7.4.5 Setting the iBMC IP Address

Scenarios

This section describes how to set the iBMC IP address on the BIOS.

You can set the iBMC IP address on:

BIOS

iBMC WebUI
For details, see

FusionServer Pro Rack Server iBMC User Guide

iBMC CLI
Run the following command:

ipmcset -d ipaddr

For details, see

FusionServer Pro Rack Server iBMC User Guide

Default IP Address

Default Subnet Mask

192.168.2.100

255.255.255.0

FusionServer Pro 2288H V5 Server
User Guide

7 Installation and Configuration

Issue 08 (2019-10-30)

108

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands