Huawei FusionServer Pro 2288H V5 User Manual Download Page 145

Page: 145 / 177

To go to the BIOS front page, press

F11

To boot from the network, press

F12

. Enter the password in the displayed dialog box.

To access the Smart Provisioning GUI, press

The screen for entering the BIOS password is displayed.

Figure 9-17

Entering the BIOS password

Step 6

Enter the BIOS password.

The default BIOS password is

Admin@9000

Press

to alternate between the English (US), French, and Japanese keyboards.

For security purposes, change the administrator password periodically.

The system will be locked if an incorrect password is entered three consecutive times. You can
restart the server to unlock it.

The

Main

screen of the Setup Utility program is displayed.

----End

9.6.2 Entering the BIOS (Cascade Lake)

Procedure

Step 1

FusionServer Pro 2288H V5 Server
User Guide

9 Common Operations

Issue 08 (2019-10-30)

137

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands