Huawei FusionModule500 User Manual Download Page 230

Page: 230 / 302

Step 4 Click Apply.

----End

5.3.13.1.7 Installing the NE Mediation

Prerequisites

●

You have logged in to the NetEco client using a browser.

●

You have obtained the NE mediation software package.

Procedure

Step 1 Obtain the installation package of the mediation software.

●

For enterprise users:
a. Log into Huawei's enterprise support website

https://

support.huawei.com/enterprise

b. Browse or search iManager NetEco 6000 V600R009 Version Mapping,

obtain

iManager NetEco 6000 V600R009 Version Mapping

from Support

> Documentation > Network Energy > Fusion Modular Data Center >

iManager NetEco 6000. Based on the actual NE types and versions to

download the mediation software installation package.

●

For carrier users:
a. Log into Huawei's carrier support website

https://support.huawei.com

b. Browse or search iManager NetEco 6000 V600R009 Version Mapping,

obtain

iManager NetEco 6000 V600R009 Version Mapping

from Support

> Software > Network Energy > Data Center Facility > Fusion Modular

Data Center > iManager NetEco 6000. Based on the actual NE types

and versions to download the mediation software installation package.

Step 2 Choose System > Configuration > Adapter Management from the main menu.

Step 3 Click Upload. On the displayed Upload Adapter Package page, click + and select

the files to be uploaded.

NO TE

A maximum of 50 adapter packages can be uploaded at one time.

Step 4 Click Upload to upload the files.

Step 5 Select the NE mediation packages to be installed on the Adapter Management

page and click Install. Then click Yes in the displayed dialog box. The length of

time used for the installation is related to the number of adaptation layers. Please

wait patiently for the installation to complete.

----End

5.3.13.1.8 Adding a Management Domain

This section describes how to configure managed domains.

FusionModule500 Smart Mini Data Center

User Manual

5 Power-On Commissioning

Issue 02 (2020-12-25)

220

Summary of Contents for FusionModule500















































































































































































































































































































Search results

Summary of Contents for FusionModule500

Reviews:

Huawei FusionModule500, User Manual, Page: 230 / 302

Search results

Summary of Contents for FusionModule500

Reviews: