Huawei 9000 VCT V100R011 Administrator'S Manual Download Page 84

Page: 84 / 204

Procedure

Step 1

From the home screen, select

Conference History

to display the

Conference History

screen.

Step 2

Select an entry, and then perform the following operations:

If the selected entry is a site, press

or on the remote control to initiate a two-party

conference.

If the selected entry is a conference, press

or on the remote control twice

consecutively to initiate a multi-party conference.

Press

to edit the entry or

to delete the entry.

----End

5.1.3 Initiating a Conference from the Address Book Screen

You can initiate a conference by defining the sites that will join the conference and setting
conference parameters on the address book screen.

Context

From the

Address Book

screen, select sites using one of the following three methods:

Select sites from the address book screen.

If a network address book has been configured on the FTPS server, select

Update

download the network address book to the local address book, and then select desired sites.

If a network address book has been configured on a Lightweight Directory Access Protocol
(LDAP) server, select

LDAP Address Book

, and then search for and select desired sites

from the

LDAP Address Book

screen.

For details about how to configure a network address book, see section

5.8.2 Configuring the

Network Address Book

Procedure

Step 1

From the home screen, select

Address Book

to display the

Address Book

screen.

Step 2

Select a site or multiple sites participating in the conference.

If you select a site, you can press on the remote control, and then select

Place Call

place a call to the site immediately or

Create Conference

to initiate a conference.

If you select multiple sites, you can press on the remote control to initiate a conference.

Press

to edit the selected site or

to delete the selected site.

----End

5.1.4 Initiating a Conference from the Call Screen

You can initiate a two-party conference by defining the site that will join the conference and
setting the call rate and call type on the call screen.

HUAWEI 9000 HD Video Terminal
Administrator Guide

5 Initiating a Conference

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential

Summary of Contents for 9000 VCT V100R011













































































































































































































Search results

Summary of Contents for 9000 VCT V100R011

Reviews:

Huawei 9000 VCT V100R011, Administrator'S Manual, Page: 84 / 204

Search results

Summary of Contents for 9000 VCT V100R011

Reviews: