manualshive.com logo in svg

Huawei 9000 VCT V100R011, Administrator'S Manual, Page: 100 / 204

Share
Download
Huawei 9000 VCT V100R011 Administrator'S Manual Download Page 100

Parameter

Description

H.239 video
protocol

This specifies the video protocol used by the terminal to encode and
decode the presentation.
In a dual-stream conference, the video protocol and the H.239 video
protocol support certain protocol combinations.

Presentation
resolution

You can select a proper format based on the H.239 video protocol that
is already set.

H.239 video
bandwidth type

This specifies the mode for setting presentation video bandwidth.

l

Auto

: The presentation video bandwidth is set automatically based

on the relevant policy of the terminal.

l

Manual

: Allows users to set 

H.239 video bandwidth(%)

H.239 video
bandwidth(%)

This specifies the call bandwidth percentage occupied by the
presentation.
This parameter is available when 

H.239 video bandwidth type

 is set

to 

Manual

.

Presentation plug-
and-share

If this option is selected, the terminal automatically shares the
presentation with remote sites when there is a presentation source
plugged in.

H.239 sending
mode

l

Auto

: The terminal automatically sends the video along with the

presentation. This option is available when the H.239 mode is set
to 

Live

.

l

Manual

: You need to use the remote control to share a

presentation.

H.239 mode

The default value is 

Presentation

.

When initiating a dual-stream conference, set the H.239 mode.

l

Presentation

: When the video is switched, the presentation

remains unchanged. Only one site in the conference can share a
presentation at one time. If a conference is held with a built-in
MCU, only 

Presentation

 is available.

l

Live

: The presentation viewed by each site is switched along with

the video. All the sites in a conference can share presentations
simultaneously.

NOTE

l

When connected to an IMS network, the terminal cannot share a
presentation in Live mode.

l

During a dual-stream conference, two independent video stream channels,
that is, the video and the presentation, can be transmitted; furthermore, two
channels of video from the local site can be transmitted or two channels of
video from a remote site can be received at the same time.

HUAWEI 9000 HD Video Terminal
Administrator Guide

5 Initiating a Conference

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

88

Summary of Contents for 9000 VCT V100R011













































































































































































































Reviews:

No comments