manualshive.com logo in svg

Huawei 9000 VCT V100R011, Administrator'S Manual, Page: 186 / 204

Share
Download
Huawei 9000 VCT V100R011 Administrator'S Manual Download Page 186

LCD Usage Requirements

l

Do not expose the LCD to direct sunlight.

l

Do not press, scratch, or beat the LCD, or place heavy objects on top of it.

l

Do not watch the LCD screen for a long time. This may harm your eyes or blur your vision.

LCD Cleaning Requirements

l

According to the instructions in the attached manual, use a piece of soft cloth to remove
dust from the surface of the LCD.

l

Do not clean the LCD with volatile solvent, such as alcohol, benzene, or a dilution agent.
Do not contact the LCD with a rubber or plastic material for a long time. This will deteriorate
the surface gloss of the LCD.

Wireless Product Usage Requirements

l

Keep the wireless device away from magnetic storage devices, such as a magnetic card or
a floppy disk to prevent loss of the stored information.

l

Stop using the wireless device and disconnect it from the power supply in places where
using of wireless devices is prohibited or using of a wireless device may lead to interference
or danger.

l

Unplug the wireless device from the terminal and turn off the terminal close to a high-
precision controlled electronic device, such as an audiphone, a pacemaker, fire alarm, or
an automatic gate. Otherwise, this will lead to malfunction of the electronic device.

l

The user who uses an electronic assistant medical-treatment device needs to confirm with
the service center regarding the effects of the radio wave on this device.

l

Do not take the wireless device to the operation theater, Intensive Care Unit (ICU), or the
Coronary Care Unit (CCU).

l

When using the device, ensure that the antenna of the device is at least 20 cm away from
all parts of your body.

l

In the area with inflammable or explosive materials, turn off your wireless device and
follow the relevant instructions given on the label to prevent an explosion or fire.

l

Use your wireless device and its accessories in a clean and dust-free environment. Ensure
that the wireless device does not come in contact with flame or a lit cigarette.

l

Ensure that the wireless device and its accessories are dry.

l

Do not drop, throw, or bend your wireless device.

l

Do not place the wireless device and its accessories in areas with extreme temperatures.

HUAWEI 9000 HD Video Terminal
Administrator Guide

A Safety Precautions

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

174

Summary of Contents for 9000 VCT V100R011













































































































































































































Reviews:

No comments