manualshive.com logo in svg

Huawei 9000 VCT V100R011, Administrator'S Manual, Page: 162 / 204

Share
Download
Huawei 9000 VCT V100R011 Administrator'S Manual Download Page 162

11.1 Routine Maintenance

An administrator must check the working environment, cable connection, communication
network connection, and audio-visual input and output of the terminal periodically, to ensure
that the terminal and its peripheral equipment work properly.

11.1.1 Checking Working Environment Periodically

To ensure that the terminal can be used properly, it is essential for the administrator to check
the working environment periodically.

Table 11-1

 lists the items that need to be checked.

CAUTION

If one of the following items cannot meet the corresponding requirement, it is recommended
that you power off the terminal and then take measures to improve the environment. Ensure that
the terminal is used only when all the following items meet the relevant requirements.

Table 11-1

 Checking the working environment

Item

Requirement

Ambient temperature

0°C to 40°C

Relative humidity

10% to 80%

 

11.1.2 Checking Cable Connection Periodically

Check the audio-visual and communication cables periodically.

Audio-Visual Cables

Periodically (once a week is recommended) check whether the cables connecting the terminal
to the peripheral equipment and the power supply are securely connected.

If the cables are connected properly, power on the terminal to test the connectivity. If any of the
cables are loose, connect them securely.

Communication Cables

Periodically (once a week is recommended) power on the terminal, and then check whether the
communication cables connected to the terminal work properly using the following method:

Place calls to other terminals using different communication methods, such as accessing a
broadband network.

HUAWEI 9000 HD Video Terminal
Administrator Guide

11 Maintenance and Troubleshooting

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

150

Summary of Contents for 9000 VCT V100R011













































































































































































































Reviews:

No comments