Information for accurate measurements
56
J
Replacing the motor of the cleaner
As a rule, replace the drive motor of an automatic cleaner once every three years.
1.
Loosen the four screws, and remove the cleaner cover.
2.
Check the O-ring for deterioration (elasticity and cracking).
3.
Remove the connector of the wiring of the motor. Do not strain the connector.
4.
Loosen the four screws securing the motor platform, and remove the motor
assembly.
5.
Take out the set of thrust bearings. (Reuse it.)
6.
Attach the new motor assembly in the reverse procedure.
7.
Attach the connector of the motor.
WARNING
Unexpected operation of the unit may result in damage to the unit or an injury. Be sure to turn OFF the
power when replacing consumables.
Screw
Cover
