Measurement
31
When
Cleaning
“
non
”
is
set
This screen shows
that the automatic
cleaner is not used.
“- - - - “ indicates
that the automatic
cleaner is not used.
When
“
yES
”
is
set
Cleaning operation
standby time
screen
Displays the time
before starting the
next cleaning in a
format of hours-
minutes-seconds.
10 hours or longer
are shown in hours
and minutes.
Cleaning test
motion screen
When the ENT key
is pressed, the
cleaner operates 1
stroke of
reciprocating
motion and stops at
the top dead point.
For test operation
A transmission
signal is in the hold
state at the hold
time during
cleaning operation
and after cleaning.
Screen for checking
the amount of light
for zero calibration.
This screen
displays a ratio of
the factory-
configured amount
of transmitted light
for zero calibration
to the amount of
transmitted light for
the latest zero
calibration.
You can be made
aware of any
deterioration in the
LED light source.
Screen displaying
the number of days
elapsed since the
last zero calibration
Indicates the
number of elapsed
days after the last
calibration.
Time is counted up
every two h during
energizing. Time is
not measured
during power-off.
Moving average
count check screen
(damping factor)
The moving
average count can
be checked and
changed.
Increase dF to
reduce the
variations in
measured values.
Decrease dF to
speed up the
response.
Screen 1
Screen 2
Condition
Description
Action
Remarks
