Measurement
39
For automatic cleaning, approx. 30 s per cycle are needed for the length of cleaning time.
Once the cleaning operation has started, the cleaner continues to operate until the specified
cleaning time ends, and then stops at a next top dead point.
For example, if cleaning time length is set at 20 s, the cleaning operation ends in 1 stroke of
reciprocating motion. If cleaning time length is set at 40 s, the cleaning operation ends in 2
strokes of reciprocating motions.
If a cleaning directive is a trigger, the cleaning operation is performed for the set cleaning time
length, per trigger.
(Cleaning operation continues while trigger signals are continuously input.)
